STEEL PIPE BOLLARDS - BOLLARD SLEEVES or COVERS

The purpose of most bollards is to prevent vehicular intrusion beyond the point at which they are installed.  By far the most typical and least expensive bollard is a cylindrical steel pipe bollard, or pipe guard, usually 6 5/8 inches in diameter, buried 2 or 3 feet in ground and extending 4 feet above ground.  The pipe bollard is usually surrounded by a 16 inch to 3 foot wide concrete footing with the interior of the steel pipe also being filled with concrete.  If the bollard is to be surrounded by a sidewalk, the footing usually can be smaller.

This static bollard can be painted or covered by a maintenance free domed polyethylene bollard sleeve.  The more Decorative Bollard Sleeves can disguise the plain steel pipe to look as if it were of a much fancier design, such as cast metal or decorative bollard. The Deco Bollard Sleeve & Metro Bollard Sleeve (¼”polyethylene thermoplastic covers) are a low cost way to dress up any standard 6” steel pipe bollard.  These bollard sleeves are designed to last for many years, and never need maintenance.  The combination of a Steel Pipe Bollard and a decorative or ornamental sleeve is much stronger than a precast bollard alone, and an ornamental bollard is usually more expensive.  

If you require static bollards to protect utilities, sidewalks, or property, we can supply those, and recommend the type of contractor who will install them.  We usually can have pipe bollards and bollard sleeves at your job site within five to ten business days. 

 Steel Pipe Bollards                             Primed Steel Bollards

 Please Call for pricing....                                                                Please Call for pricing....

            Bollard Sleeves or Covers